Hi! The splitter will not route 5V back out to another splitter port. Your gpsd(tcx)o antenna port is safe.
-- Björn <div>-------- Originalmeddelande --------</div><div>Från: cfo <xne...@luna.dyndns.dk> </div><div>Datum:2014-11-29 08:53 (GMT+01:00) </div><div>Till: time-nuts@febo.com </div><div>Rubrik: [time-nuts] LTE-Lite and - S14WI 1x4 GPS splitter </div><div> </div>Gents I have a S14WI GPS antenna splitter w. Opt : Amplified + DC Bias Select + Ant Current monitor It's connected to a Maxrad 40dB "ice cone timing antenna" DS for the spliter here http://www.amtechs.co.jp/2_gps/pdf/S14WI_spec.pdf http://tinyurl.com/nfmpyqm Currently i have this connected : Port1 : Tbolt Port2 : Z3810A Port3 : Reserved KS Lucent (Waiting for TNC->BNC adapter) Port4 : Reserved for LTE-Lite (hope to connect today) Port3/4 have a 50ohm (BNC ethernet terminator) on right now As i read the DS , the splitter currently used the antenna power from Port1, to power the antenna, and Port2 is terminated w. 200ohm. I'm a bit unsure about the DS , but as i read it it will isolate Port4 from the antenna DC , as it draws power from Port1 (Tbolt) The LTE-Lite is 3v3 , and wouldn't like to get 5v on it's antenna. If anyone could have a quick glance , and verify my assumptions i'd be gratefull. TIA CFO -Denmark -- E-mail:xne...@luna.dyndns.dk _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.