Hendrik,
the 10 MHz may not be dirty. The spectrum you show is that of a 10 MHz
rectangular wave and that's what on the output from the 10 MHz
connector, just a (may be clean) TTL-level signal, nothing fancy.
Götz
Am 02.12.2014 07:57, :
Hi List,
here is my example spectrum taken with a Rigol 815, due to inpatience
only up to 100 MHz.
(I don't know if this was posted yet, but still then it would be a 2nd,
3rd example.)
This shows what is meant by "clean 15, dirty 10 MHz." I always use
insane pre-attenuation as every beginner should do. But even a dirty 10
MHz can be good, e.g. for driving comb generators =)
Hendrik
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.