I'm using a soekris net4501 that I hacked according to http://www.febo.com/time-freq/ntp/soekris/ I have hacked a Motorola Oncore M12+T receiver inside the case on a piece of veroboard. It's really ugly, using a bunch of discretes for RS232 translation and such. A BNC on the front privides PPS for use with other external hardware. Recenlty I felt the need to add hardware sawtooth correction. I want to use the Dallas DS1023 chip to do this. I designed a little board as a 'carrier' for the motorola, a little micro, the delay line for sawtooth correction and rs232 for the soekris (but could, of course, also be used to connect to any other device that has RS232).
I was wondering if there was any interest from other people for a little board like this. I don't have the parts yet, but the DS1023 is pretty much the most exotic part on the board. I have attached some pictures of the design. Regards, Tom
_______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
