Hi The cell phone base only needs one reference to keep it running. They disable the un-needed output to make it clear which one should be used. It’s a very common thing in modern systems, not just telecom setups.
Bob > On Dec 13, 2014, at 11:55 PM, Hal Murray <hmur...@megapathdsl.net> wrote: > > Can somebody confirm that the PPS and 15 MHz on the standby unit are disabled? > > Does anybody understand how/why they do things that way? Is that a typical > Telco interface? > > > If anybody is poking around inside and find a simple way to turn them back > on, please share. > > > The PPS is 400 microseconds wide. > > > -- > These are my opinions. I hate spam. > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.