I've built a bunch of carrier board for the M12+T timing receiver. One thing I could not find much information about is the maximum sawtooth (which, I assume, related directly to the frequency of the receiver's internal LO). I know my particular module outputs a correction values between -15 and +15, in which case I could use a DS1023-25 delay-line chip which uses .25ns increments instead of the DS1023-100, which uses 1ns. This would give the overall circuit slightly better linearity. Problem is that the datasheet doesn't say anything about this, it just says -128..+127ns. Does anyone know if there are receiver units out there that have different LOs ?
Regards, Tom _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.