Gerhard - I would like to make the board if you could make the layout available. I don't have Altium, so would need the artwork to be able to toner transfer the board. Is it available?
Thanks -----Original Message----- From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of Gerhard Hoffmann Sent: Saturday, April 04, 2015 7:19 AM To: time-nuts@febo.com Subject: Re: [time-nuts] Frequency doubler 5/10 and distribution amplifier for Lucent KS-24361 Am 03.04.2015 um 04:04 schrieb Philip Gladstone: > I'm coming late to this thread from January -- but did anybody ever > make the PCBs for Gerhard's 10MHz output board? I'm interested..... > > I just got my pair of RFTG's. > Congratulations! There isn't a lot of news.. The interest on the net quickly boiled down, my sample works and so there was not a great incentive to follow that with much energy. And getting boards out does not mean that those are really built or that there is any feedback at all, as I saw with my 220pV/sqrtHz preamp. The Altium Designer files are available, maybe the regulators should be changed to sth. bigger (TO220 with small heat sink or so) regards, Gerhard (who will spend this rainy&cold Easter weekend on a 1pps generator whose outputs can be skewed in ps-steps to check the linearity of T2D converters or time stretchers.) _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
