Every timelab needs a time interval counter. I'd say look for a HP 5334B with option 010. I've picked up two from ebay for about USD100 each, and that comes with a decent 18011. After that, watch your cash disappear as you discover a need for faster/better/more accurate instruments, not to mention better and better oscillators..
Ole On Tue, Apr 7, 2015 at 12:33 AM, Chris Albertson <albertson.ch...@gmail.com> wrote: > You can do a lot for $200 if you can build electronics yourself. > Decent GPS with PPS starts at under $20 on eBay. Same for surplus > 10MHz oscillators. People have build usable counters for cheap > microprocessor development boards and software. But it all depends > on what you want to measure > > On Mon, Apr 6, 2015 at 9:30 AM, Adam Blakney <akblak...@gmail.com> wrote: > > I was wondering how expensive it would be to have even a small and lower > > level time lab. What are some less expensive models of machinery i would > > need, and how much maintenance is required? > > > > Thanks, Adam > > _______________________________________________ > > time-nuts mailing list -- time-nuts@febo.com > > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > > -- > > Chris Albertson > Redondo Beach, California > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.