On Tue, Apr 21, 2015 at 1:23 PM, Bob Camp <kb...@n1k.org> wrote: > Hi > > inevitably on these devices, there is a marketing brochure that hits the high > points > in the specification. That information is public and intended to get “buzz” > going on > the product. Once an OEM gets serious about the product, (the TBolt is > targeted > at OEM’s) a detailed specification gets written. It may be in the form of > detailed > specs or in the form of a test regime / service scenario the unit is expected > to > perform in. That document is rarely available to the public.
D'oh. > How are you measuring the holdover performance? You mention that you have > no counter and no other standards. When one uses Lady Heather to switch the Tbolt to manual holdover, Lady Heather continues to monitor the offset between the oscillator and GPS. No doubt this method isn't nearly as good as using a counter or some other standard, but it's what I have. Cheers! -Pete -- Pete Stephenson _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.