Hi In some ways this is like:
I can buy tubes of paint and some brushes down at Hobby Lobby. That’s what I need to paint the next Mona Lisa. While that’s all quite true, it’s not the whole story :) There’s an enormous amount of training and experience that goes into fitting this sort of thing up. There is even a certain amount of “art” that goes beyond simple training. Not all watch/clock makers are up to this sort of thing. Highly skilled people have been trying to do this kind of clock for a *long* time ….It’s not just an assembly process. Indeed I’d love to see the details of how they did the design. There are some basic challenges that they (obviously) addressed very well. Even with a good description of what they did and a pile of parts, you are still only (maybe) 10% of the way to a duplicate. Note: I’m *not* claiming I am any good at clock making. I’ve simply seen a lot of this sort of work done over the years. Bob > On Apr 22, 2015, at 10:03 AM, Dan Kemppainen <d...@irtelemetrics.com> wrote: > > Hi, > > In all reality, achieving these results without decades of experience is > probably unlikely. That said, are the specific plans available or published > anywhere? Is is possible that someone willing to build and tinker could make > a 'functional' copy of this unit? > > I would guess that not all of the parts need extreme tolerances. But even > then many mills are holding positioning tolerances well under .001", with > tool deflections of .0001" or under (if run and maintained properly, that > is). My 'list' includes a mechanical clock build. And this one would be a > dandy to try to build! > > In any case, the clock is still interesting to read about! It's great that > some of you are lucky enough to get to see it! :) > > > Dan > > > On 4/21/2015 12:00 PM, time-nuts-requ...@febo.com wrote: >> >> You could always use the traditional method of piercing saw and files. >> Thinking about it I suppose files were the original milling machine. Be >> aware that the horological approach is different from the engineering >> approach and there are numerous traps waiting for the unwary. Harrison >> and Martin's clock B have remarkable performance but could still be >> improved by using multiple pendulums to overcome the noise effects for >> example a two pendulum clock is performing within 1 second in six months >> (so far) so I will have to get the hacksaw out for the three pendulum >> version - or is it back to the GPSDO. >> >> Peter > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.