Dick, Getting them working is easy. Connect the supplied interface cable between the 'J5' connectors on each unit, supply an antenna connection to the TNC connector on the REF 1 unit, supply +24 VDC to pin 1 of P1 of both units, connect the 'return' to pin 2 of P1 of both units and stand back.
As Bob says, there is a long list of posts about these units including how to communicate with them. The link on the listing is to a 'time-nuts' posting by Stewart Cobb and is very informative. Good luck. Joe -----Original Message----- From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of Richard Solomon Sent: Thursday, May 21, 2015 3:36 PM To: Discussion of precise time and frequency measurement Subject: [Bulk] Re: [time-nuts] Lucent/Symmetricom Z3810AS, KS24361 - They're Back Is there a discussion somewhere on these units and how to get them working ? 73, Dick, W1KSZ On 5/20/2015 5:47 AM, J. L. Trantham wrote: > Looks like another shipment for those that might have missed them before. > > > > Item 221777430088 > > > > No connection to seller except satisfied customer. > > > > Joe > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.