I agree with Bob, find a vendor you can trust and make sure you buy from an authorized distributor or if just need two or three parts try to get them as samples.directly from the manufacturer. The reason for this is you may get a fake or reject part and you will never know.
Trying to do the measurements yourself is pretty much out of the question today.. Every improvement made it harder in that the equipment had to itself be lower in noise If interested https://scholar.google.com/scholar?q=measuring+transistor+noise&hl=en&as_sdt=0&as_vis=1&oi=scholart . -pete On Sat, Jul 18, 2015 at 5:29 AM, Bob Camp <kb...@n1k.org> wrote: > Hi > > You have (and always have had) two basic choices: > > 1) Buy a very expensive part from somebody who has gone to the trouble > of characterizing the noise performance and will guarantee at least some > of what they show on the data sheet. > > 2) Buy a bunch of cheap transistors and test them. Lock in on a > specific part and vendor. Keep monitoring what you get in case they > “improve” > their process and the magic goes away. > > How do you select candidates? That’s never been easy, there is less and > less data on the sheets every day. Normally the first step is to look at > a vendor that you have had luck with in the past. The next step is to ask > them… > > Bob > > > > > On Jul 18, 2015, at 5:16 AM, Attila Kinali <att...@kinali.ch> wrote: > > > > On Fri, 17 Jul 2015 23:25:10 -0400 > > Charles Steinmetz <csteinm...@yandex.com> wrote: > > > >> A pair of Zetex (Diodes, Inc.) > >> ZTX849 or FZT849 actually have significantly lower voltage noise than > >> either the LM394 or MAT12. > > > > I always wonder how you figure out whether a transistor is low noise > > or not. What part of the datasheet hints at which transistors have low > > noise and which have not? Even if it's just try and measure, how > > do you find good candidates to measure? > > > > Attila Kinali > > > > -- > > I must not become metastable. > > Metastability is the mind-killer. > > Metastability is the little-death that brings total obliteration. > > I will face my metastability. > > I will permit it to pass over me and through me. > > And when it has gone past I will turn the inner eye to see its path. > > Where the metastability has gone there will be nothing. Only I will > remain. > > > > _______________________________________________ > > time-nuts mailing list -- time-nuts@febo.com > > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.