For HF to uW oscillators if find these modeling efforts not adequate . Only a test circuit will show the prove... Ulrich N1UL In a message dated 7/19/2015 10:36:10 A.M. Eastern Daylight Time, azelio.bori...@gmail.com writes:
For a method to extract AF and KF try this: <http://joerg-berkner.de/Fachartikel/pdf/2000_AKB_Berkner_1f_noise.pdf> see also <http://scholarcommons.usf.edu/cgi/viewcontent.cgi?article=2270&context=etd> from page 55, on the parameter extraction for the BJTs usually AF is greater than 1, as you can see in this appnote from CEL: <http://www.cel.com/pdf/appnotes/an1026.pdf> A SILVACO appnote on how to model for SPICE2 for 1/f (from page 45): <http://www.silvaco.com/content/kbase/noise_modeling.pdf> On Sun, Jul 19, 2015 at 4:59 AM, John Miles <j...@miles.io> wrote: > >> -----Original Message----- >> From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of KA2WEU-- >> - via time-nuts >> Sent: Saturday, July 18, 2015 3:40 PM >> To: time-nuts@febo.com >> Cc: akpod...@synergymwave.com; alexander.r...@rohde-schwarz.com >> Subject: Re: [time-nuts] how to find low noise transistors >> >> BFG540 >> >> > > That's what I mean -- both BFG540 and BFG591 have been discontinued by NXP. Guess they don't sell enough of them these days. > > -- john, KE5FX > Miles Design LLC > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.