hi Skipp
please let me know if you find something I am in a similar situation
thank you in advance
73
KJ6UHN
Alex
-------- Original Message --------
Subject: [time-nuts] Trimble Thunderbolt CPR?
Date: Tue, 28 Jul 2015 12:11:35 -0700
From: skipp Isaham via time-nuts <time-nuts@febo.com>
Reply-To: skipp Isaham <skipp...@yahoo.com>, Discussion of precise time
and frequency measurement <time-nuts@febo.com>
To: time-nuts@febo.com
Trimble Thunderbolt CPR?
An Ebay purchased Trimble Thunderbolt arrived DOA, it has no rs-232 output
and I should also check the 10 MHz output soon. I'd like to have an initial
look at a diagram to see if there are any "user serviceable parts" on board.
Initial web searching suggests the schematic is not easily located.
Would anyone have a source (even if I have to pay for it) of a diagram and/or
any initial suggestions to trouble shoot an appearing to be dead Thunderbolt.
I have a working Thunderbolt available for relative comparisons, sitting right
next
to the DOA unit.
Again, thank you in advance for your replies.
regards,
skipp
skipp025 at yahoo dot com
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
