Hi Corby, I agree with you that if selected, there may be many differences between objects of the same type. Unfortunately it is very difficult to know what is selected and what is not. For example I found a 10811 mounted in a Z3801A who have the temperature set-point completely wrong. I remember that TVB has done tests on a number of Z3801s and the results were very different from one to each other. In fact I would expect HP since it is bothered to put a second oven in Z3801A, had selected the oscillators but it is not.
I have not yet measured the 105 Phase noise, I have a 5MHz reference is -115 and -135 dBc respectively at 1 and 10 Hz. Luciano www.timeok.it On Thu 06/08/15 20:38 , <cdel...@juno.com> wrote: > Luciano, > > I have found that "selected" 10811 units will offer significantly better > short term stability as a stand alone or open loop oscillator over the > 105 style oscillator. (Mid parts in 10-13th from 1 to 100 Seconds) > > However with the 5065A locked the performance will be driven by the loop > and both styles will give similar performance. > > Cheers, > > Corby > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts [1] > and follow the instructions there. > > > > Links: > ------ > [1] > http://webmail.timeok.it/parse.php?redirect=https://www.febo.com/cgi-bin/ma > ilman/listinfo/time-nuts > Message sent via Atmail Open - http://atmail.org/ _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
