On 10/6/15 12:46 PM, Can Altineller wrote:
Hello,
I was hoping for a cheap VCXO. I think those ovenized ones are more
expensive.
Where would I get a brand new VCXO, that has < 1ppm, and specs that are
true. (as in the declared spec would match the actual performance, these
days when we buy from ebay, or aliexpress this is hardly the case)
There's tons of vcxos from Digikey.. just searching for VCXO and
restricting it to 10 MHz turns up about 17 parts.
choosing the first one in the list
http://www.foxonline.com/pdfs/FVXO_HC53.pdf
50ppm pulling range
This happens to be a ceramic resonator, so the close in noise is
probably not so hot.
But some checking at Digikey and Mouser and the like should turn up
soemething.
How about an Abracon ASVV series SMT at 20 MHz for $2.98 Qty 1?
or a VCTCXO AST3TQ-V-10.000MHz-28 for $19.25 Qty 1 from Digikey.
280 ppb from -40 to +85
10 ppm pulling range..
Abracon is in southern california, for what it's worth.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
