Luca, Any identifying marks on the part?
Thanks. Joe -----Original Message----- From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of Luca Dal Passo Sent: Saturday, October 24, 2015 1:49 AM To: Discussion of precise time and frequency measurement Subject: [Bulk] Re: [time-nuts] 10811 unsoldered fuse Hi all, i have on my desk a disassembled 10811 for service. It has a thermal fuse of the rectangular black type placed just above the IC. The leads are plugged into two very small sockets on the pcb, they are not soldered. Bye Luca iw2Lje Il giovedì 22 ottobre 2015, J. L. Trantham <jlt...@att.net> ha scritto: > David, > > Good to know. Thanks for the info. Any idea of a source for that part? > > I don't remember whether my fuse was soldered in or plugged in. > Whatever it was, I replaced it the same way. > > Thanks again. > > Joe > > -----Original Message----- > From: time-nuts [mailto:time-nuts-boun...@febo.com <javascript:;>] On > Behalf Of David G. McGaw > Sent: Wednesday, October 21, 2015 10:02 AM > To: Discussion of precise time and frequency measurement > Subject: [Bulk] Re: [time-nuts] [Bulk] 10811 unsoldered fuse > > That probably is an original thermal cutout. It matches ones I have > found when repairing 10811As. > > David > > > On 10/20/15 7:59 AM, J. L. Trantham wrote: > > Dimitri, > > > > That clearly is not the 'original' thermal fuse that I found in my 10811. > > Mine was a small, axial lead, cylindrical part. > > > > It looks like someone substituted a different part (is that a fuse > > or a > > cutoff?) and did a poor job soldering. I think the temperature is > > correct though. I'd have to look at the manual to know for sure. > > > > My 'fuse' failed and I replaced it. All the soldering was OK on my unit. > > > > Joe > > > > -----Original Message----- > > From: time-nuts [mailto:time-nuts-boun...@febo.com <javascript:;>] > > On > Behalf Of > > Dimitri.p > > Sent: Monday, October 19, 2015 2:32 PM > > To: time-nuts@febo.com <javascript:;> > > Subject: [Bulk] [time-nuts] 10811 unsoldered fuse > > > > How common is it to find undetected missing solder on 10811 parts > > after all these years? > > > > Dimitri > > > > _______________________________________________ > > time-nuts mailing list -- time-nuts@febo.com <javascript:;> To > unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com <javascript:;> To > unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com <javascript:;> To > unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.