Hello again to the Group, I was handed two small 15MHz Vectron Crystal Oscillator modules. They are the traditional DIP IC package layout, although only 3 pins exit what appear to be the 1-7 row while 4 pins are presented for the 8-14 row.
There's not much in the way of indicated part numbers, but the date code is 8530. I can apply 5Vdc to pin 14, ground to 7 and obtain the 15 Mhz output from pin 3. But there is no indication or easily found data regarding the supply voltage requirement. Would anyone with hands-on experience with these smaller Vectron Oscillator modules be able to confirm the typical IC DIP package operating voltage to be 5Vdc nominal? And what you might expect the output impedance to be? thank you in advance for your reply Regards, skipp skipp025 at yahoo com _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.