Hi Part of the way through the development of the modules, they started adding various commands. Eventually that changed the way things worked enough that it no longer is a “little bit longer string” sort of thing.
Bob > On Feb 7, 2016, at 10:33 PM, Frederick Bray <fwb...@mminternet.com> wrote: > > This brings up a question that I have been wondering about. Has anyone tried > using one of the Synergy M12/adaptor board assemblies as an update in the > Z3801 or similar unit? If the original firmware just ignores the extra data, > perhaps the Synergy unit might work? They are quite inexpensive on the used > market. > > See: > > http://www.synergy-gps.com/index.php?option=com_content&task=view&id=173&Itemid=115 > > As a further upgrade, might it be possible to replace the M12 receiver unit > on the Synergy board with a Jackson Labs M12M replacement receiver? While > the additional data would be lost / ignored, the superior characteristics of > the Jackson Labs unit could prove helpful. > > Thanks for any information. > > Fred Bray > KE6CD > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.