Hal, I did the "*TST?" command, which seemed to do a power cycle. The Status screen shows "GPS 1PPS Synchronized to UTC".
Joe Gray W5JG On Wed, Mar 16, 2016 at 11:30 PM, Hal Murray <hmur...@megapathdsl.net> wrote: > > jg...@zianet.com said: >> I noticed on the Status screen that the Lucent unit said the PPS was locked >> to GPS, not UTC, as the Z3801A is. So, I issued ":DIAG:GPS:UTC 1" and "TST?" >> to correct this. > >> But things are not as I expected. Displaying the clock for both GPSDO's in >> Z38xx now shows them to be 17 seconds different, which is of course the leap >> seconds. > >> This seems backwards. With both units set to UTC, why are they showing >> different times? > > My notes about that include "needs power cycle" > > > -- > These are my opinions. I hate spam. > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
