You do not have to purchase an expensive 6T to get 10 KHz out even a $ 10 unit has adjustable output some rely on the battery to memories the setting more expensive ones have EEPROM Bert Kehren In a message dated 5/16/2016 7:03:23 A.M. Eastern Daylight Time, step...@tompsett.net writes:
I believe there are several Ublox modules that may do what you want e.g. LEA-6T LEA-M8T But I find the "Precision Frequency Reference (GPS Clock)" a useful tool for generating GPS locked signals it's programmable over a far wider range than you require (450Hz-800MHz), but is very simple to program and use. http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=107&pro ducts_id=234 On 16/05/2016 07:17, Ilia Platone wrote: > Can anybody here advice me a gps module breakout board with 10KHz > output? I read on some web page that there are some jupiter receivers > that can do this but I can't find any board or receiver with these > modules. > > I need an output in lower decades than 10MHz, for a test project. > ("cheap" if possible) > Thanks in advance > Ilia. > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > -- Stephen Tompsett _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.