-------- In message <CALH-g5b0C+aBz53MUM7bkJ00441AvNxwFLc2RgjgPj=k1fp...@mail.gmail.com>, Jim Palfr eyman writes:
>As far as a remedy goes we are going to try a solid state relay that only >switches on at 0V in the AC waveform. This should slow the inrush current, >and hopefully the magnetic impulse. If that is not enough, consider a small VFD drive, and ramp up voltage+frequency over 10 seconds. It's slightly more intrusive, as you will need to remove the starting capacitor from the motor to install the VFD. -- Poul-Henning Kamp | UNIX since Zilog Zeus 3.20 p...@freebsd.org | TCP/IP since RFC 956 FreeBSD committer | BSD since 4.3-tahoe Never attribute to malice what can adequately be explained by incompetence. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.