Dear Bob,
In case you are looking for replacement, there is clone available for most of
the old Trimble modules (Lassen, IQ, LP) :
http://www.naelcom.com/ds/gps/ds_lassen_clone_series.pdf
Regards,
Luc
-----Message d'origine-----
De : time-nuts [mailto:time-nuts-boun...@febo.com] De la part de Bob L.
Envoyé : lundi 30 mai 2016 03:55
À : time-nuts@febo.com
Objet : Re: [time-nuts] Looking for a Trimble Lassen SK-8 or SK II 5V GPS
receiver
Hi folks,
I went with plan “B” and am no longer looking for relatively recent Lassen
receivers.
The clock using the older Lassen receiver speaks NMEA as well as Trimble
protocols. I’m building a simple ExpressPCB board in the Trimble Lassen form
factor to interface with a variety of more modern receivers. A few gates and a
jumper enabled logic inversion now enable the clock to use most any 5V
integrated antenna/receiver speaking NMEA or Trimble protocols at RS-232 or
CMOS levels.
Also found a pair of Garmin GPS18x LVC 5m on ebay which will be arriving next
week about the time the bare boards get here.
Problem solved, correct date restored!
Many thanks!
Bob L.
bobhome at pacbell dot net
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
