Corby I have seen those on accelerometers. The opposite type is a 5-44. Thats not a great description but they are still around even today. Sorry I have never known there name or part number. Paul WB8TSL
On Fri, Jun 3, 2016 at 5:04 PM, <cdel...@juno.com> wrote: > Well the checkout of the 106A oscillator section is going well. > > I ran it for 6 hours and the outer oven came down OK, will have to wait > until I can do a longer attended run for the inner oven as it takes 8 1/2 > hours per the manual to come down! > > This unit was not built with the fine adjust via an internal pot as shown > in the manual but does have the external EFC jack show. (EFC jack does > work) > > After the 6 hours Frequency was within a HZ and could be adjusted. Quit > there until I can find a spot for it to live for an extended test. > > Need help identifying the RF connectors on the unit. > > They are not SMA but look to be the same diameter. would need two > adaptors or a couple old cables with the matching connector I could > splice into. I had to poke in a wire and use clip leads! > > Cheers, > > Corby > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.