I got in the Osmocom LEA-6T bare boards from China. They look good. I have a few extras available at $10 each shipped in the US. Contact me off list. If you need two or more boards, it is cheaper to order them from OSHPARK.COM You can get three for $19. I put the Eagle .BRD files on OSHPARK.COM shared projects (https://oshpark.com/shared_projects/CZcc5jFa) If you need a solder paste stencil, download the .BRD file from OSHPARK.COM and send it to OSHSTENCILS.COM (hint: save a few bucks and don't use their default border size, also you probably don't need the back side stencil). From looking at the stencil layer in GERBV, it looks like the openings for the LEA-6T module are a bit long and might run into a couple of adjacent caps. You might need to tweak the paste on a couple of the pins.
_______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.