Have you looked at alien to convert the rpm to a deb? https://www.google.com/#q=alien+package+conversion
> Semi-off-topic.. > > I've got a bunch of Keysight/Agilent/HP instruments with USB interfaces > that I want to control from Python. On Mac and PC, the PyVisa library > works great (either the one with the NI back end or the python only back > end ) > > But, on Ubuntu, there's no way to install the NI drivers (RH install > only, and Ubuntu is debian..) > > So, I've been doing usbtmc, which sort of works. (after figuring out > all the udev rules stuff) > > If I do something like this from the python interpreter: > > >>> import usbtmc > >>> myinst = usbtmc.Instrument( mfr, product) > >>> myinst.write('some command') > > it works fine. > > But if I put the same three linesin a .py file and run it, it doesn't > always work.. sometimes, you need to send the command twice. > > It seems it might be a timing thing (in libusb or usbtmc?) but putting > some sleep() in between connecting to the instrument and doing the write > doesn't seem to work all the time. > > Very curious. > > Any ideas? > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.