Your comments on layout made me think again of how to implement these projects.
How do you use a 14 pin SMD IC? I could try to connect it with flying leads
but I'd like something better. Is there some kind of socket for these devices?
Or a generic board to receive such things?
Bob
On Monday, August 8, 2016 8:02 PM, David <davidwh...@gmail.com> wrote:
I actually tested various 74120 dual 4-input NAND drivers which
produce the sync output on my B&K function generator to find ones
which would provide the fastest and cleanest pulse. AS (advanced
schottky) and FAST (fast advanced schottky TTL) were the best for me.
Modern inexpensive discrete logic however can do a much better these
days.
One interesting thing I learned is that the dual 4-input NAND pinout
overlaps the quad 2-input NAND pinout so in a properly designed layout
where only 2 gates are used, either part can be used.
On Mon, 08 Aug 2016 16:31:44 -0400, you wrote:
>If you have a function generator with a sync output, you can use that pulse
>into a T connector with your scope to do a TDR measurement of the cable. If
>you have a scrap of the new cable, you can use that to calibrate the setup.
>
>Regards,
>Tom
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
