Can anybody say more about the integrator term in the Tbolt? In the Arduino GPSDO I have, I use 1/TC/TC/damping and use damping = 2. I see Nick Sayer do the same but use damping 1.75. Simulations I have done in Excel seems to indicate that a damping in my sense of about 3 could be better to minimize overshoots.
Having looked at old data I have found on Time nuts seems to indicate that the Tbolt uses 1/TC/TC/damping/damping/2? Lars >Warren wrote: >If you have a good antenna setup and a constant temperature environment: >The way to get the lowest noise over short time periods on a TBolt is to set the TC setting as high as you can (typically 500 to 1000+), and set the Damping factor as fast as you can (typically 0.7 to 1). >The reason is that the Tbolt has a simple basic PI phase lock loop controller. >The Proportional gain is a function of 1/TC and the Integrator gain is a function of the damping. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.