I bought an Isotemp OCXO82-59 with a frequency of 10 MHz for a $3 at the
MIT flea market.
As expected it was dead. It heats up as expected but looking at the
output with a scope there
is nothing. However looking at the output with a spectrum analyzer I
can see a faint 10 MHz
signal. It seems that the oscillator is running but the output
circuitry is dead. Reasonable
assumption?
Anyway, has anyone had any luck unsoldering the tin case without
destroying it?
Pete.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
