Hi Bill --
That's a bit more than I had in mind, but very cool. :-) What I really
meant was a heat pump or other unit with good control loop that I could
use in a standard insulated space, just to keep "nominal" conditions
(ie, not wide-range testing).
Thanks,
John
----
On 10/26/2016 12:09 PM, William H. Fite wrote:
John, this is what I bought for the Orlando VA Medical Center when I was
setting up the research lab there.
Not cheap, though. 🤑
https://www.thermalproductsolutions.com/products/walk-in-temperature-humidity-test-rooms
On Wed, Oct 26, 2016 at 11:59 AM, John Ackermann N8UR <j...@febo.com> wrote:
I may have the opportunity to build a small "clock room" and am
considering whether I could make it an environmentally controlled space.
I'd like to learn about the options for doing this.
The space would probably be 6x8 feet or so, in a basement with one outside
wall.
Can anyone point me to purveyors of the hardware to do something like
this? Because I'll have a limited time to build this, I'm looking for
something that uses more-or-less off the shelf gear, and not a whole lot of
custom engineering.
Thanks!
John
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/m
ailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.