The best way to hand solder small SMT parts is to put a blob of solder on one pad, position the part, old it down with something (fingernail works well, maybe tweezers), then touch that pad/solder blob with the iron. The blob should melt and the part should push down into the blob. Make sure the part is aligned, then go to town soldering the remaining pads. Go back and touch up the blob pad. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
- Re: [time-nuts] I love the smell of tantalum i... Scott Stobbe
- Re: [time-nuts] I love the smell of tantal... Adrian Godwin
- Re: [time-nuts] I love the smell of tantal... jimlux
- Re: [time-nuts] I love the smell of ta... Adrian Godwin
- Re: [time-nuts] I love the smell ... William H. Fite
- Re: [time-nuts] I love the smell ... jimlux
- Re: [time-nuts] I love the smell of ta... Hal Murray
- Re: [time-nuts] I love the smell ... Robert LaJeunesse
- Re: [time-nuts] I love the smell ... jimlux
- Re: [time-nuts] I love the smell of tantal... Christopher Hoover
- [time-nuts] I love the smell of tantalum in the morning Mark Sims
- Re: [time-nuts] I love the smell of tantalum in the mor... Tom Van Baak