Hi For a long term installation, an antenna location that will “see” more sat’s is a really good idea.
Bob > On Nov 26, 2016, at 8:55 PM, Giuseppe Marullo <giuse...@marullo.it> wrote: > > Hello to all, > > I connected the unit to a 11m of H-155 cable(assumed 4.79dB loss "worst case" > at 1.5GHz), thrown the GPS antenna on the balcony horizontally and this is > what I got: > > UCCM-P >SYSTem:STATus? > > ------------------------------------------------------------------------------- > 57964-80 serial number 87896988 firmware ver 2.0.1.6-01 LINK mode > ------------------------------------------------------------------------------- > Reference Status __________________________ Reference Outputs > _______________ > XX Ref 8KHz 0: [Unusable] > XX Ref 8KHz 1: [LOS] TFOM 2 FFOM 0 > XX Ref 8KHz 2: [LOS] UCCM A Status[ACTIVE] > XX Ref 8KHz 3: [LOS] > >> GPS: [phase:-1.2E-08] > ACQUISITION ...................................................[GPS 1PPS > Valid] > Tracking: 4 ____ Not Tracking: 6 ________ Time > ____________________________ > PRN El Az C/N PRN El Az GPS 23:42:46 26 Nov 2016 > 24 45 139 43 25 57 286 > 6 24 62 38 19 11 42 ANT DLY -1 ns > 2 30 101 46 32 37 279 Position ________________________ > 29 30 206 41 12 70 37 MODE Hold > 14 26 309 > 31 8 309 LAT N 45:40:29.276 > LON E 9:26:51.177 > HGT +320.96 m (MSL) > > > > > ELEV MASK 5 deg > ------------------------------------------------------------------------------- > > Command complete > UCCM-P > > > > Seems to work (? I understand this from GPS phase and FFOM 0, not sure about > the hold position status) I have somewhat stable 10MHz output, tomorrow I > will use a mast for the antenna to get it higher slightly above the roof, > (vertically this time!). > > - I got the software from the seller but complains about some ancient OCX > stuff don't want to mess with ActiveX anymore, hopefully Lady Heater will > support it soon. > > - Given the attenuation (less than 5 dB) do I really need to change the cable > for something better? > > Leds are Yellow Activity solid, red unnamed blinking fast, Red 1PPS blinks > once a second and DC green is solid. > > Anything else special to check? > > > Giuseppe Marullo > > IW2JWW - JN45RQ > > > PS: the other clock (qrp-labs) is way behind schedule, but hopefully will > arrive soon > > > ` > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
