I think the designation "UCCM" actually applies to the Symmetricom GPSDO boards. Since most of these tend to come salvaged from China, tongue in cheek I suspect "Unusable, Crushed, Cr_p, Mangled"
Do the Trimble units report UCCM from the serial port? -=Bryan=- ________________________________ From: time-nuts <time-nuts-boun...@febo.com> on behalf of Tim Lister <lister...@gmail.com> Sent: December 4, 2016 3:00 PM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] UCCM GPSDO On Sun, Dec 4, 2016 at 2:50 PM, Larry McDavid <lmcda...@lmceng.com> wrote: > Does anyone know the origin of the "UCCM" designation for the Trimble GPSDO > boards recently popular here? > > Is "UCCM" a valid model number, is it an acronym or is it something else? > > I've packaged several of these Trimble boards and I've seen about four > others, none of which was marked "UCCM." I've seen one on-line picture of a > packaged board that shows a separate label with "UCCM" marked. > > GPSCon already supports these "UCCM" boards and the next release of Lady > Heather is expected to support them also, so there is some acceptance of > this "UCCM" designation. But, what is the origin of this term and is it > valid? That's what the command prompt says when you connect to it over serial and it shows up in various places in response to commands such as SYST:STAT? I haven't taken my reboxed GPSDO apart to see if it says UCCM anywhere else on the board. > > -- > Best wishes, > > Larry McDavid W6FUB Cheers, Tim _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts time-nuts Info Page - American Febo Enterprises<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> www.febo.com time-nuts is a low volume, high SNR list for the discussion of precise time and frequency measurement and related topics. To see the collection of prior postings to ... and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
