I'm confused here, LH can be connected to only one TB at any one time (depending on command line options).
But in any case at the end of the LH 48 hr survey, the survey location will be stored into the currently connected TB. If both TBs are connected to the same antenna, I think you'll need manually to set the location of the second one (lat./long./altitude) based on the survey results stored in the other one. Dave -----Original Message----- From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of Don@True-Cal Sent: 07 December 2016 17:50 To: Time Nuts Group Subject: [time-nuts] Question on LH I'm using the latest version of LH connected to two Thunderbolts. Whenever I do a precision 48-hour antenna survey, I'm confused on if the derived best coordinates are automatically loaded into the Lat & Lon registers when it completes. What is the procedure at the completion of the precision survey or is it completely automatic? Thanks, Don _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
