Hello,
I'm in the process of restoring my 58503A. In the process of disassembling it, the rear plastic frame that is held to the back panel with the two T15 Torx screws had become brittle with age and it cracked into several pieces as I was removing it. It will be difficult to get all of the small pieces glued back into place, so I'd rather just replace it with an intact part. I have a spare rear frame from another HP bench instrument in my spare parts bin, but much to my surprise I found that the center-to-center hole spacing of the screws on the 58503A frame is about 7.5", whereas on all of the other HP bench instruments that I've checked it's only about 7.375", so my spare frame does not fit. Does anyone have, or know where to get, the proper rear frame for my 58503A? Thanks, Stan _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.