Hi Roughly 99% of all GPSDO’s are only used for the PPS output. They go into cell sites and the reason they exist is to sync up the Gold Codes on CDMA. That’s also why you see a *lot* of PPS only Rb’s on the surplus market. The ones that don’t get used for cell towers, mostly go into other com systems that for some reason need to have accurate time (also involves codes …).
Bob > On Dec 18, 2016, at 6:16 PM, Bob Stewart <b...@evoria.net> wrote: > > One thing I've never really understood is who actually uses the high-quality > 1PPS output from a GPSDO. I have spent a lot of time, effort, and money on > developing my GPSDO without a whole of thought to the user base. It was just > a quest for the best result I could obtain with a particular technology. The > frequency standard users was a no brainer. Everyone who wants a frequency > standard eventually understands they need to get a GPSDO, or an Rb, or a Cs. > And that's all I thought I had: a good frequency standard. And then Tom > prodded me a bit and showed me the shortcomings of what I was doing, and I > did something about it. So, if an NTP user can get his time fix directly > from a noisy receiver, who actually needs a time-accurate, low jitter 1PPS > pulse? > Bob - AE6RV > ----------------------------------------------------------------- > AE6RV.com > > GFS GPSDO list: > groups.yahoo.com/neo/groups/GFS-GPSDOs/info > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.