Read about the synthesizer design of that generator here:

https://ia600407.us.archive.org/10/items/Hewlett-Packard_Journal_Vol._42_No._2_1991-04_Hewlett-Packard/Hewlett-Packard_Journal_Vol._42_No._2_1991-04_Hewlett-Packard.pdf


Dave, looking at the graph you posted it appears to me that the shift is
10 Hz, not 100 Hz. It appears to me that is an audio spectrogram. I have
no idea if the frequency shift is in the generator or receiver.


--

Bill Byrom N5BB







On Thu, Dec 22, 2016, at 10:10 AM, David wrote:

> On Thu, 22 Dec 2016 12:39:27 +0000, you wrote:

> 

>> But I find it a bit odd that HP would have a 1 Hz software option
>> on this
>> instrument, if the instrument jumped up/down 100 Hz.

>> 

>> Now I don't yet have the 1 Hz option programmed in, and it might well
>> change the behavior completely, but I'd still like to find a
>> way, if one
>> exists, of checking this with the equipment I have.

>> 

>> The signal generator is no longer supported, but I could try my
>> luck seeing
>> if there are any known problems with this unit, or firmware upgrades
>> available - currently revision 29, May 1991.

>> 

>> ...

>> 

>> Dave

> 

> I agree with Bill, maybe something is going on at the other end.

> 

> While I do not expect this sort of thing from HP, could they have

> deliberately designed the sweep generator to include those 100 Hz

> bumps unless the 1 HZ software option was purchased?

> 

> Like Paul, I would not expect the kind of stability you need from a

> sweep generator but that 100 Hz jump is just weird.  It does kind of

> remind me of popcorn noise but without a time scale and a longer

> record, it is difficult to tell.

> _________________________________________________

> time-nuts mailing list -- time-nuts@febo.com

> To unsubscribe, go to

> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts

> and follow the instructions there.


_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to