-------- In message <CANX10hDU56pOQ1kQAbDBGLSS6U0D=AMp+=d7cajbhxb+zkd...@mail.gmail.com> , "Dr. David Kirkby (Kirkby Microwave Ltd)" writes:
>I measured my voltage overnight in a peak hold at 255.10 V RMS as close to >the meter as I could. There is a very specific procedure for measuring this and it averages over some number of seconds which I have forgotten. Peaks happen all the time when stuff turns on and off. >I spoke to a friend of mine who worked at the CEGB. He thought I might have >a tough time getting the electricity company to do anything about 2.1 V if >it was expensive for them to do. It's cheap. All transformers have "Winding-couplers", basically switches that pick how many windings to use for the exact same reason. After they buried the distribution here, the voltage rose. I called them and explained it was above limits for many minutes at a time (causing my solar inverter to stop). A truck popped around, cut power to the local area, and dropped a couple of volts on the transformer, turned power on again and the problem was fixed. -- Poul-Henning Kamp | UNIX since Zilog Zeus 3.20 p...@freebsd.org | TCP/IP since RFC 956 FreeBSD committer | BSD since 4.3-tahoe Never attribute to malice what can adequately be explained by incompetence. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.