In my case (the original post) there can be no multipath difference, same antenna and done at the same time. The length of the cables from the amplified splitter are about the same; within inches.
This must be some difference in the receiver, perhaps in the math?

Pete.

On 1/7/2017 4:16 PM, Bob Camp wrote:
Hi

In terms of multipath at GPS frequencies, a couple of inches is a *lot*. Also 
unless you have
pretty good antennas (as in much larger than 1” each) they will have phase 
issues unique
to each antenna. Phase cancellation and addition is what gives you multipath.

Bob

On Jan 7, 2017, at 4:00 PM, Gary E. Miller <g...@rellim.com> wrote:

Yo Bob!

On Sat, 7 Jan 2017 15:16:34 -0500
Bob Camp <kb...@n1k.org> wrote:

The “simple” answer is that the weird legs going out from the central
blob are the result of multi-path / reflections in the received
signal. With enough data you might be able to correlate them to
observed obstructions.
I have lots of data from GPS with the antennas mounted 1 inch apart.
They show different weird legs, so I suspect that local geology/architecture
is not the whole story.

For example, compare the plot I just sent, to the one attached here.
Two GPS right next to each other, very differently looking plots.

I'll admit to never generating plots over the same time interval,  I'll
start a 24 hour test of two GPS right now.

RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
        g...@rellim.com  Tel:+1 541 382 8588

            Veritas liberabit vos. -- Quid est veritas?
    "If you can’t measure it, you can’t improve it." - Lord Kelvin
<uputronics.png>_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to