Are you talking about locking the 50MHz VCXO to my 10 MH. Standard? I want the 25MHz to be from my 10MHz OCXO which is my station standard which will locked to GPS eventually.
Loren WA7SKT On Wed, Jan 18, 2017 at 4:01 PM -0800, "Richard (Rick) Karlquist" <rich...@karlquist.com<mailto:rich...@karlquist.com>> wrote: A better and easier way is to phase lock a crystal oscillator. I would use a 50 MHz VCXO and divide the output by 2 to get a 25 MHz square wave. Rick N6RK On 1/18/2017 10:28 AM, Loren Moline WA7SKT wrote: > Hello, > > I am looking for a good X5 multiplier to use to generate a 25MHz signal from > my 10MHz OCXO. I want to divide by 2 and multiply by 5 with a bandpass filter > in the output and then a 3.3 volt 25MHz signal out. > > > Maybe someone has better ways? > > > Loren Moline WA7SKT > > Member: Pacific Northwest VHF Society and ARRL > Member: Hearsat Satellite Monitoring Group. www.uhf-satcom.com > Member: CVARS-Chehalis Valley Amateur Radio Society > Starchat IRC: Channel = #hearsat > RF Electronics: Starchat IRC: Channel = #rfelectronics > Grid: CN86mr > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
