FWIW, that looks like aviation equipment (gov't or civil), with a locking connector.
That stuff is designed for minimum size and weight. You might find the inside of the box quite cramped. Buying aviation parts is even more expensive than buying boat parts. Bill Hawkins -----Original Message----- From: time-nuts on behalf Of Bob Bownes Sent: Friday, May 19, 2017 10:48 PM Pretty sure that connector is an off the shelf Amphenol part. If you can't find it, however, you can replace it with an off the shelf one that will fit in the same hole. (If your lucky, you can even re-use the pins.) The replacement will run you about $30-40 for the pair, chassis and plug. Check Mouser, etc. > On May 19, 2017, at 23:21, Bob kb8tq <kb...@n1k.org> wrote: > > The mating side of that 22 pin connector isn't going to be cheap. It > looks like something out of their government systems group back in the late 90's. If it is, you may have a hard time getting info on it. > I'd pop it open and see what's inside. At least that will give you an > idea if it's 20 years old or 5 years old. Knowing the era should help in the search for information. > > Bob > >> On May 19, 2017, at 10:21 PM, Scott Armstrong <aa...@vntx.net> wrote: >> >> I acquired a Trimble 16634-10 receiver. A search of the web has >> turned up nothing so far. >> The unit is in a steel box built like a tank. SMA connector for >> antenna input and a 22 pin circular connector for the I/O and power >> _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
