> worthwhile. I guess they can bury all this stuff with me, like King Tuts > tomb...
Alternative use for your pile of surplus connectors: http://leapsecond.com/pages/chess/ /tvb ----- Original Message ----- From: "Jeff Kruth via time-nuts" <time-nuts@febo.com> To: <time-nuts@febo.com> Sent: Sunday, May 28, 2017 8:59 AM Subject: Re: [time-nuts] GR Connectors > GR made several coaxial connector series: the obvious 874, the 8.5 GHz > very low residual VSWR GR-900 (IIRC 14 mm bore) and the GPC-7 (7 mm bore) 18 > GHz precision connector, a very rare precursor to the APC-7 with a 1/4 turn > locking collar, only place I saw it was in the HP 1965 catalog, brief > lifetime. I have a few in my collection of MW history stuff. > > GR was the cats meow for a long time. I have a pile of the 900 & 874 > stuff, just because I like it. The AIL hot/cold load that uses 900 is still > worthwhile. I guess they can bury all this stuff with me, like King Tuts > tomb... > > 73 > Jeff Kruth > WA3ZKR > > > > In a message dated 5/28/2017 5:53:31 A.M. Eastern Daylight Time, > time-nuts-requ...@febo.com writes: > > Message: 17 > Date: Sun, 28 May 2017 05:15:52 -0400 > From: Scott McGrath <scmcgr...@gmail.com> > To: Discussion of precise time and frequency measurement > <time-nuts@febo.com> > Subject: Re: [time-nuts] Two pieces of old General Radio Freq. Nuts > Message-ID: <dad89e1a-2704-4e79-9c02-cf331598a...@gmail.com> > Content-Type: text/plain; charset=utf-8 > > The GenRad 874 connector was good to 4.5 Ghz and took a Banana plug in > the center conductor without changing electrical characteristics!!! > > http://www.ietlabs.com/pdf/GR_Experimenters/1948/GenRad_Experimenter_Oct_194 > 8.pdf > > Not bad for a connector designed in 1948! > > It was largely supplanted by the APC-7 connector from Bunker-Ramo which > was also a hermaphrodite design but had a 18 Ghz frequency limit > > Lots of Tek calibrators used this connector due to its good impedance > matching without requiring obsessive connector maintenance as the APC-7 does > (cleaning, gauging and finger replacement) > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.