It was off 7.5KM, that’s a little beyond groggy, no? More like a trip to Vegas.
I’ll let it rerun the survey and see if it gets closer. > On Jun 4, 2017, at 9:50 PM, Mark Sims <hol...@hotmail.com> wrote: > > Be careful when using one unit's location to set a different model's > location... particularly the altitude. Some devices report altitude in > MSL, others in AGL... and different units may use different models for the > ellipsoid. You are always better off using coordinates generated by the > particular device (either the built-in self survey or something like Lady > Heather's precision survey). > > I did some tests while developing Lady Heather's precision survey code. I > got pretty consistent lat/lon/alt results on the same units but consistent > offsets between different models of receivers. > > I would suggest letting the Motorola re-surevy itself... it may have been a > bit groggy after first being powered up after a few years of sleep... I know > I am... > > --------------- > >> I then set the M12 reference location to the Lucent location as I know it to >> be correct. > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.