> I hope the XOR doubler works well. I think the initial comment about using a XOR mentioned a couple of gates for delay.
A trick from the old FPGA days. You can guarantee that the pulse is wide enough to clock a FF if you put a FF in the chain. That is replace the gates-for-delay with a FF. Use the pulse to clock the FF and feed the output of the FF to the other side of the XOR. (You may need some delay on the input to the FF to meet setup time. You have the XOR delay to start with.) -- These are my opinions. I hate spam. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.