Interesting discussion. I simply have my TBolt bolted onto an Aluminium rack panel so I could rack it. I wasn't aware there was any special need beyond that? Right? Regards Paul WB8TSL
On Mon, Jul 24, 2017 at 8:12 PM, Bob kb8tq <kb...@n1k.org> wrote: > Hi > > The TBolt is a great unit !! > > The main source of temperature impact is the DAC / Voltage reference. > Since that is a > “distributed” circuit, the temperature control also needs to cover more > than just the backplate. > > Bob > > > > > On Jul 24, 2017, at 6:37 PM, Norm n3ykf <normanliz...@gmail.com> wrote: > > > > Hi all! > > > > Allowing a friend to borrow a tbolt. > > > > Is it necessary to cool (maintain a certain) baseplate temperature for > > optimum performance? > > > > Currenlty mounted inside an aluminum chassis. It's screwed to an > > aluminum sheet that covers around 2/3 the base. > > > > Thanks, > > > > Norm n3ykf > > _______________________________________________ > > time-nuts mailing list -- time-nuts@febo.com > > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.