The PRS10 was intended as FRS alternative you can use the same plug with no changes on both unitsBert Kehren
Sent from my Galaxy Tab® A -------- Original message --------From: Mark Sims <hol...@hotmail.com> Date: 10/7/17 1:58 PM (GMT-05:00) To: time-nuts@febo.com Subject: [time-nuts] PRS10 PRBB Shematics SRS sells the connector. You might want to make sure you have a tube of ass-lube handy when you check the price... It's around three times the distribution price. SRS really should have used a standard D-sub and a couple of SMA connectors. I considered laying out a PRBB clone, but didn't want to mess with sourcing that damn connector. I wound uo buying the PRBB and the heatsink (and a tube 'o lube). Spent more for those than the PRS-10. The heatsink they ship now does not seem to be nearly as good as the older one. Also be aware that the SRS ordering page is not HTTPS and your credit card info is sent in plain text... you might want to order over the phone. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
