If one for example wishes to estimate PN down to an offset of 1Hz then an 
equivalent filter noise bandwidth of 0.1Hz or perhaps less is desirable (the PN 
spectrum  at low offsets is far from flat). To achive accurate noise estimates 
a simulation time of at least 100 x the reciprocal of the equivalent noise 
bandwidth is required. The resultant simulation for 1000 sec or more takes 
considerably longer than 1000 sec to  run. 

Bruce

> 
>     On 23 October 2017 at 03:23 Dana Whitlow <k8yumdoo...@gmail.com> wrote:
> 
>     Hello Attila,
> 
>     It seems to me that an AC simulation could never work since the
>     very generation of phase noise by the mechanisms that matter is
>     a modulation process at heart, automatically forcing one into the
>     realm of transient simulations.
> 
>     But I am surprised about the simulation times that you speak of.
>     Would you be willing to post some information detailing your
>     methodology and an example "simple" circuit?
> 
>     Dana
> 
>     On Sun, Oct 22, 2017 at 7:53 AM, Attila Kinali <att...@kinali.ch> wrote:
> 
>         > > 
> >         Hi,
> > 
> >         I have been looking into spice simulations of circuits, in 
> > particular
> >         trying to extract PSRR and phase noise information. Unfortunatelly,
> >         the obvious way of putting AC sources at the right places does not
> >         work, as the (ideal) input signals are not small and drive the 
> > circuit
> >         into non-linearities. Hence I have to do transient simulations.
> >         But extracting PSRR and phase noise information out of a transient
> >         simulation is cumbersome at best and takes a lot of simulation time
> >         (we are talking about hours to days for simple circuits).
> > 
> >         I am looking for guidelines and hints how to speed things up.
> >         Maybe even being able to use standard DC and AC analysis for the
> >         circuit instead of transient. Unfortunately, my google-foo was not
> >         strong enough to find approriate documentation.
> > 
> >         Does someone have any hints what I should read or search for?
> > 
> >         Thanks in advance
> > 
> >         Attila Kinali
> > 
> >         --
> >         It is upon moral qualities that a society is ultimately founded. All
> >         the prosperity and technological sophistication in the world is of 
> > no
> >         use without that foundation.
> >         -- Miss Matheson, The Diamond Age, Neil Stephenson
> > 
> >         _______________________________________________
> >         time-nuts mailing list -- time-nuts@febo.com
> >         To unsubscribe, go to https://www.febo.com/cgi-bin/
> >         mailman/listinfo/time-nuts
> >         and follow the instructions there.
> > 
> >         _______________________________________________
> >         time-nuts mailing list -- time-nuts@febo.com
> >         To unsubscribe, go to 
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> >         and follow the instructions there.
> > 
> >     > 
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to