uBlox has a utility called u-center <https://www.u-blox.com/en/product/u-center-windows> that's a free download. You can use it to configure the various output options (and enable and disable different messages) and a then save this config back to the module as the start up default.
Wayne On Sat, Oct 28, 2017 at 3:12 PM, jimlux <jim...@earthlink.net> wrote: > I've got 4 NEO-7M-C modules hooked up to 7 beaglebone greens, side by > side, and they're not behaving the same.. > > I've got gpsd running, and I'm looking at the output of cgps and/or > gpsmon, as well as ppstest > > > Some emit NMEA sentences, others binary (ublox?) strings? > > Some get a fix and start toggling the 1pps line, others don't. > > Is there some command string one can send to them to put them into a known > state (cold reset?) - the one that's working the best (I.e. has a fix AND > toggles 1pps) seems to be putting out binary strings (when viewed with > gpsmon). > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/m > ailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.