Do not toss, first check output of OCXO if good keep if you do not fiend the problem. If no output replace. If L H shows that it works bring OCXO output directly.Bert KehrenÂ
Sent from my Galaxy Tab® A -------- Original message --------From: Richard Solomon <w1...@outlook.com> Date: 1/26/18 1:39 PM (GMT-05:00) To: time-nuts <time-nuts@febo.com> Subject: [time-nuts] Trimble Thunderbolt Issue I have a T-Bolt whose 10 MHz output has dropped off to about 6 mV. Using T-Bolt Mon, all the Alarms are Green and it shows Tracking 3 or 4 Satellites (small Hockey Puck Antenna). Without a schematic I am lost as to where to look. Anyone have any suggestions ? I had to toss an otherwise working T-Bolt. Thanks for any assistance, Dick, W1KSZ Sent from Outlook<http://aka.ms/weboutlook> _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.