Magdi, Excellent summery !!!!
-pete On Tue, Feb 27, 2018 at 9:13 AM, Majdi S. Abbas <m...@latt.net> wrote: > On Tue, Feb 27, 2018 at 08:01:12AM -0600, John Green wrote: > > I need the part number of the connector that the Motorola Oncore series > GPS > > receiver plugs into. Does anyone have that info at hand? > > Which Oncore? The M12+ and the earlier ones are different. > Early receivers used a standard dual row 0.1" (2.54mm) pitch for > power and data, and an MCX antenna connector. > > Later receivers used a 1.27mm pitch (0.050") 2x5pin header > with (from memory) the same pinout. > > You should be able to search on pitch, row and pin count on > your distributors website and find a variety of manufacturers. > There's nothing special about these connectors. > > And while you're ordering them, Trimble went to a 2x4 pin > 2mm / 0.079" connector. If you're going to play with a Resolution T > SMT module or something along those lines down the road, you might > as well order that up, too. > > --msa > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
