Anyone who is using one (or both) of these, and/or folks who have a
logical opinion:
[]
There's more... but this is a good start. Just want to try and get
parts on the way. Have to build a separate outboard regulator for the
timing GPS antenna, too.
Thanks!
Clay Autery
=============================
Clay,
I have all three of these units, all powered off USB. I don't see any
reason why you shouldn't use a USB cable with just the DC part connected, so
that there's no issue about radiation. A standard USB port would only
supply 0.5A so that's an upper limit on the power consumption. If it's a
very long USB cable (you mention mast-head) check the resistance.
As a crude guide...
- The (larger box) NTP server feels cold to the touch.
- The smaller, single output frequency source feels very slightly warm to
the touch (feeding an Icom IC-R8600)
- The larger, dual-output frequency source feels slightly warm to the touch.
There's an e-mail address where you could ask: supp...@leobodnar.com
Cheers,
David
--
SatSignal Software - Quality software written to your requirements
Web: http://www.satsignal.eu
Email: david-tay...@blueyonder.co.uk
Twitter: @gm8arv
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.